CE Approved

V-PAC®  System

Proven air purification for large commercial HVAC systems


  • 99.9% elimination of SARS-CoV-2 using proven UVDI V-MAX technology
  • Air purification and contaminant removal
  • Reduction of smoke and odors with advanced PCO technology
  • Continuously increased air flow for better air movement

99.9% Elimination of SARS-CoV-2 Using Proven UVDI V-MAX Technology

  • V-MAX has independently proven 99.99% inactivation of airborne SARS-CoV-2 in a single pass at an airflow rate of 500 feet per minute. To replicate conditions in a typical HVAC duct, UVDI V-MAX 254 nm UV-C lamps were arranged in a parallel configuration.
  • Testing conducted in a modified HVAC duct built at certified BEI-recognized BSL-3 laboratory.
  • Testing results verify the accuracy of UVDI’s proprietary product software which sets custom product specifications for targeted efficacy. The software was used to inform the testing protocols.
  • Independently proven testing that provides scientific confirmation of UVDI V-MAX’s effectiveness against coronavirus variants.


Diagram of Proven SARS-CoV-2 Ellimination Utilizing V-MAX Technology

Highly Effective Air Purification and Contaminant Removal

Removes air contaminants by combining 254 nm UV-C and TiO2, creating powerful hydroxyl radicals via a 3-step process.

  1. UV light illuminates the titanium di-oxide (Ti02) coated photocatalytic oxidation (PCO) panel, to begin an activation process.
  2. The activation generates highly reactive hydroxyl radicals and super-oxide ions resulting in a strong chemical “oxidizing” reaction between the supercharged ions and gaseous pollutants such as VOCs and odor molecules.
  3. This breaks the pollutant down into harmless carbon dioxide and water molecules, making the air more purified.
V-PAC System Inside an AHU

Easy Installation and Maintenance

  • Easy to install in both existing and new equipment
  • Complete system fits in a section as small as 500 mm wide
  • Scalable design to fit any plenum size
  • Photocatalytic Panels (PCO) and BPS Lite Activated Carbon panels are designed for installation in standard filter tracks
  • Utilizes V-MAX high output lamp systems
  • Negligible pressure drop
San Francisco Airport

Positive Impact on Occupant Health

  • Removes interior and exterior gaseous pollution sources such as tobacco smoke, cleaning solvents, off-gassing from building materials, human metabolic by-products, vehicle exhaust, paint fumes, jet fumes, manufacturing process emissions, and agriculture process emissions that cause illnesses
Input Voltage Lamp Configuration
53.34 cm Dual 53.34 cm 83.82 cm Dual 83.82 cm 121.92 cm 154.94 cm
120 0.45 0.90 0.75 1.45 1.24 1.3
208 0.30 0.60 0.45 0.90 0.75 0.80
240 0.25 0.50 0.40 0.80 0.65 0.70

Designed for use with 120, 208 and 240 VAC input. Approximate current draw (in Amps).

  • Rated for temperature 30°F to 150°F (1°C to 65°C)
  • RH: Up to 95% non-condensing 

Regulatory Approvals

ETL listed to UL/Canadian Standards:

  • UL 1598/CSA 22.2 250UL
  • 1995/CSA 22.2 236UL
  • 153/CSA 22.2 12 for category ABQK (Air Duct Mounted Accessories)

CE Certified:

  • EMC Directive 2014/30/EU: IEC 61326-1, IEC 61000-3-2, IEC 61000-3-3
  • LDV Directive 2014/35/EU: IEC 60335-2-65


PCO Filter Panels

The PCO filter panels are made of durable aluminum honeycomb construction impregnated with a proprietary coating of titanium dioxide catalyst.

Activated Carbon Filter

Utilizes a 1" thick BPS Lite filter which is housed in the same filter holding frame as the PCO.


UL 900 classified filters available.