Now CE Approved

V-MAX Technology for Advanced UV-C Air Disinfection

  • Proven 99.99% inactivation of SARS-CoV-2 in moving airstream HVAC testing
  • Configured via proprietary software modeling to meet airstream kill rates up to and above 99%
  • Flexible installation in-duct and in Air Handling Units

V-MAX Grid

Designed for Air Handling Unit use

V-MAX GRiD
CE logo

Flexible and Simple Installation

  • Easy to install in existing and new equipment
  • Scalable design to meet any plenum size
  • Lamps can be easily mounted on vertical supports
  • Ballast is designed to easily mount in vertical support strut
  • Negligible pressure drop
  • Low power consumption with universal voltage
  • 90° booted connector standard with 5' lamp leads
  • Straight connector standard with 10' lamp leads
  • Available in 21", 33", 48" and 61" lamps

V-MAX

Designed for in-duct use

V-MAX
CE logo

Flexible and Simple Installation

  • Designed for flexible fixture mounting internally or externally on the duct
  • Designed for duct-mounting parallel to the airstream providing optimum UV exposure
  • Prewired lamp connection reduced installation time
  • Low power consumption with universal voltage
  • Available in 21”, 33”, 48” and 61” lamps    

99.99% Inactivation of SARS-CoV-2 in Moving Airstream HVAC Testing

  • 99.99% inactivation of airborne SARS-CoV-2 in a single pass at an airflow rate of 500 feet per minute
  • To replicate conditions in a typical HVAC duct, UVDI V-MAX 254 nm UV-C lamps were arranged in a parallel configuration
  • Testing conducted in a modified HVAC test duct at a certified BEI-recognized BSL-3 laboratory
  • Given emerging coronavirus variants share the same RNA structure as SARS-CoV-2, these independently proven laboratory results provide scientific confirmation of the UVDI V-MAX effectiveness against newer strains

 

HVAC Duct with V-MAX UV Lights

Optional Lamp Clip Kits

34-1063 Two Snap-in Lamp Clips

V-MAX Grid Lamp Clip Kit - Snap In (2 Poly)

Part No. 34-1063

Included with the V-MAX Grid

Two Metal Clips for the V-MAX™

V-MAX Lamp Clip Kit - (2 Metal)

Part No. 40-2011

Included with V-MAX 

2 Metal and 1 End Magnetic Clip

V-MAX Lamp Clip Kit - Magnetic (2 Metal, 1 End)

Part No. 23-1068

Magenetic Plastic Clips - 2 Poly and 1 End

V-MAX Lamp Holder Magnetic Plastic Clip (2 Poly & 1 End)

Part No. 23-1069

23-1069-05 2 Poly Magnetic Lamp Clips

V-MAX Lamp Clip Kit - Magnetic (2 Poly)

Part No. 23-1069-05

23-1069-10 Magnetic Lamp Clip Set

V-MAX Lamp Clip Set - Magnetic (1 Poly, 1 End)

Part No. 23-1069-10

Two Magnetic Metal Clips

V-MAX Lamp Clip Kit - Magnetic (2 Metal)

Part No. 23-1063

Clip Features

Clip Features

Both snap-in and magnetic clips are designed to hold either the end cap or the bulb

Tech Specs

Input Voltage Lamp Configuration
21" Dual 21" 33" Dual 33" 48" 61"
120 0.45 0.90 0.75 1.45 1.24 1.3
208 0.30 0.60 0.45 0.90 0.75 0.80
240 0.25 0.50 0.40 0.80 0.65 0.70

Designed for use with 120, 208 and 240 VAC input. Approximate current draw (in Amps).

  • Rated for temperature 30°F — 135°F (-1°C — 57°C)
  • RH: up to 95% non condensing
  • 90° boot lamp connectors for ease of installation; boot extends over lamp endcap providing high level of moisture resistance

Regulatory Approvals

ETL listed to UL/Canadian standards:

  • UL 1598/CSA 22.2 250
  • UL 1995/CSA 22.2 236
  • UL 153/CSA 22.2 12

CE Certified:

  • EMC Directive 2014/30/EU: IEC 61326-1, IEC 61000-3-2, IEC 61000-3-3
  • LDV Directive 2014/35/EU: IEC 60335-2-65